To discuss your project call or email us
01757 212744

Structures

We specialise in efficient GRP structures for safe access, including fabrication and installation.

Suitable for all industrial and commercial environments, our GRP structures are maintenance free and suitable for a broad range of applications. They provide huge efficiencies over traditionally used materials, they are light in weight in comparison, longlasting, quicker and easier to install and therefore the overall project cost is reduced.

We offer a complete fabrication, delivery and installation service for a range of access structures, underpinned by engineering drawings & data when required.

Typical installation scenarios include access platform walkways, pedestrian bridges, steps & walkways, worker access to machinery, manufacturing plants, marine vessel applications, water treatment works, offshore wind & oil facilities, railway trackside applications and many more.

WHY EVERGRIP Structures?

  • Bespoke profiles designed and manufactured*
  • Comprehensive range of pultruded sections available
  • Fabrication in-house or on-site
  • Long lasting and durable
  • Little or no maintenance required
  • Load tested for safety
  • Impact resistant
  • UV resistant
  • Chemical resistant, resists a wide variety of chemicals, suits most environments
  • Fire retardant – plus a choice of resin type to meet any requirement*
  • Low electrical & thermal conductivity
  • Relative light weight makes for easy transport and reduced load on existing structures
  • Easy handling, fabrication and assembly

*Minimum order quantities and lead times may apply, please contact us for further information.


VIEW DOWNLOADS

Structures PRODUCTS

Click a product below for more information:

Access Platforms

Access platforms provide for worker safety in all types of workplace.

Suitable for industrial and commercial environments, GRP access platform systems are relatively lightweight, durable and maintenance free. They are designed to comply with all relevant standards including BS 4592 & Eurocomp and provide a safe, maintenance free and cost-effective alternative to metal or wooden structures.

GRP is perfectly suited to interior, exterior and aggressive environments where industrial chemicals, acid or salt air may quickly degrade other structures.

A typical composite platform construction would comprise of horizontal platform frame, open mesh or covered GRP grating walking surface, protective GRP hand rail system, structural columns, frame and column bracing. Platform access may be via GRP stair care or GRP ladder.

The relative light weight of the product makes transport, handling and installation far easier than metallic products. Structures may be partially assembled prior to delivery for immediate installation, or fabricated in-situ.

OPTIONS

Colours available include steel grey and high visibility safety yellow. Other resin types are available

All structures are made to measure

A drawing & engineering service is available for this product range, please contact us for further information

SPECIFICATION

Resin Type I Resin Base Isophthalic Polyester

Industrial grade corrosion resistance

Resin type fire retardant to ASTM E84, class 1 and flame spread index 15 or less, operating temperature range -50C to 105C

Suitable for all general industrial environment, mid concentrations of inorganic acids & alkalis

Constituent profiles are manufactured and tested in accordance with ISO9001:2008, EN13706, EN 13501-1:2007

Can be fixed to GRP grating platforms, concrete, metal or wooden substrates

Meadowhall-Aerial
Example Project - Meadowhall Raceway VIEW PROJECT

Bespoke Structures

Made to measure GRP structures, bespoke profiles, design and manufacture.

We offer a complete design, manufacture, fabrication, delivery and installation service for a range of access structure types.

Suitable for all industrial and commercial environments, GRP pultrusions are used to construct safe access structures such as stairways, walkways & platforms.  All systems are designed to comply with relevant standards and provide a versatile and cost-effective solution.

Find out more about the bespoke structures we have built on behalf of Laing O’Rourke.

 

OPTIONS

Colours available include steel grey and high visibility safety yellow, other resin types are available

A drawing & engineering service is available for this product range, please contact us for further information

SPECIFICATION

All structures are made to measure according to required specification

Meadowhall-Aerial
Example Project - Meadowhall Raceway VIEW PROJECT
grating
Example Project - Yorkshire Schools VIEW PROJECT

Fixed Access Ladders

Composite fixed access ladders available in two configurations.

Fixed access ladders provide for worker safety in all types of workplace. The relatively light weight of the product makes transport, handling & installation far easier than metallic products. Suitable for industrial and commercial environments, our GRP fixed access ladder systems are designed to comply with the relevant standards and provide a safe, maintenance free and cost effective alternative to metal or wooden structures. GRP is perfectly suited to interior, exterior and aggressive environments where industrial chemicals,  acid or salt air may quickly degrade other structures.

Our composite fixed access ladders are available in two configurations. Internal Access Ladders e.g. for underground inspection chambers, designed to BS 4211:2005 including straight ladder with rungs at 250 mm c/c spacing, wall brackets designed for the manhole curvature. External access ladders e.g. for above ground elevated structures, designed to BS EN ISO 14122-4:2004 including a combination of any of the following elements. Straight ladder, safety cage, safety gate, landing platform, wall/floor fixings/supports.

Structures may be fully or partially assembled prior to delivery for immediate installation.

OPTIONS

Available in steel grey, high visibility safety yellow and other resin types

All bespoke made structures in accordance with required dimensions*

A drawing & engineering service is available for this product range, please contact us for further information

Through-colour construction and an optional extra-durable polyurethane surface coating for exterior installations will provide an enduring, smart appearance that is highly cost effective when compared to stainless or galvanised steel/iron

SPECIFICATION

Resin Type Type I Resin Base Isophthalic Polyester

Steel grey or safety yellow colour. Industrial grade corrosion resistance. Resin type offers fire retardant to ASTM E84

Class 1 and flame spread index 15 or less. Operating temperature range -50c to 105c

Suitable for all general industrial environments, mid concentrations of inorganic acids & alkalis

Constituent profiles are manufactured and tested in accordance with ISO9001:2008, EN13706, EN 13501-1:2007

Can be fixed to GRP grating platforms, concrete, metal or wooden substrates

Applications include access to platforms and elevated structures, access to underground inspection areas, worker access to machinery, manufacturing plants, marine vessel applications and water treatment works

Gates, Fences and Grilles

Made to order GRP gates, fences and grilles with optional mesh grating in-fill panels.

Suitable for industrial and commercial environments, our GRP gates, fences and grilles provide a safe, maintenance free and cost effective alternative to metal or wooden structures. The comprehensive range of GRP profiles are perfectly suited to fabricate products for interior, exterior and aggressive environments where industrial chemicals or acid/salt air may quickly degrade other structures. Composite structures have displayed proven in-service performance for over 40 years.

A composite gate or fence construction may comprise the following elements structural frame or suspension sections, cross bracing, open mesh in-fill panels or grille inserts, galvanised or stainless steel gate furniture, composite self closing gate hinges, composite/steel lockable latch mechanism, all/floor fixings/fasteners/supports, structural components are available in steel grey or high visibility safety yellow, with green, black & other colours to order. They provide all the advantages of light weight, high strength and durability, coupled with a corrosion resistant, non conductive, fire retardant and maintenance free life.

Through-colour construction and an optional extra-durable polyurethane surface coating for exterior installations will provide an enduring, smart appearance that is highly cost effective when compared to stainless or galvanised steel/iron.

OPTIONS

Structures & installations made to order to pre-existing plans. Design & 3D drawing service available

Hinge & locking mechanisms, pallisade types, frangible fencing

Available as standard in grey or yellow or to order in any RAL colour*

Applications, environments and traffic

Lockable security gates, trellis style fencing, custom made grilles. Suitable for Internal or external use.

Can be fixed to concrete, masonry, steel & wood

Fixing methods include bolt & rivet fasteners with specialist adhesives

In-situ installation with mechanical or chemical fixings

SPECIFICATION

Resin Types Type I

Resin Base Isophthalic Polyester

Industrial grade corrosion resistance. Resin type offers fire retardant to ASTM E84 Class 1 and flame spread index 15 or less. Operating temperature range -50C to 105C.

Suitable for all general industrial environments. Mid concentrations of inorganic acids & alkalis

Constituent profiles are manufactured/tested in accordance with: ISO9001:2008 | EN13706 | EN 13501-1:2007

Applications for Gates, Fences and Grilles include wide span security checkpoint gates for vehicle access, trellis fencing for suburban railway platforms, security palisade type fence systems, waterside grille applications, electrical installations, cold environments, worker access to machinery railway restricted access and platform end applications

INTERESTED IN Structures?
CALL OUR TEAM ON 01757 212744

Evergrip Limited

Flaxley Road, Selby, North Yorkshire
YO8 4BG United Kingdom

PHONE: 01757 212744
EMAIL: info@evergrip.com
FAX: 01757 212 749
Company Registered Number: 04186772
Registered for VAT Number: GB 773 5346 10

Terms & Conditions
Privacy Policy

CONTACT US
Register for our mailing list